2PCS 15x6.00-6 Tubeless 4 Ply Lawn Mower Front Tire and Wheel Assembly，Replacement for Craftsman® John Deere Cub Cadet Riding Mowers Garden Lawn Tractors, 570lbs Capacity, 3" Offset Hub,3/4" Bearing

What It Is

This is a set of two front tire and wheel assemblies (15x6.00-6, tubeless, 4-ply) designed for ride-on lawn mowers and garden tractors from Craftsman, John Deere, and Cub Cadet. Each assembly has a 570 lbs capacity, a 3” offset hub, and a 3/4” bearing, making it a direct replacement for worn or damaged front tires.

Fitment & Compatibility

Before buying, confirm these three measurements:

• Tire size: Must be 15x6.00-6 (15” diameter, 6” wide, 6” rim).
• Hub offset: 3” (distance from mounting face to center of tire). Measure your current wheel’s offset to avoid steering or clearance issues.
• Bearing size: 3/4” inner diameter. If your spindle axle is 5/8” or 1”, this won’t fit. Check your mower’s model number (e.g., Craftsman 917 series, John Deere D100/D110, Cub Cadet XT1/XT2) and verify the original wheel part number. These are aftermarket, not OEM, so they may differ slightly in tread pattern or hub design.

Key Things to Know

• Installation is straightforward – remove the old wheel, slide on the new one, and tighten the axle nut. No special tools needed.
• 4-ply rating provides decent puncture resistance for typical lawn use, but don’t expect heavy-duty off-road performance.
• Tubeless design means no inner tube to deal with – just mount and go. However, the rim must be clean and the bead properly seated to hold air.
• Weight capacity (570 lbs per tire) is generous for most riding mowers, but if you have a heavy-duty zero-turn or loaded tractor, verify total weight.

Should You Buy It

If you need a reliable, affordable replacement for worn front tires on a common lawn tractor (Craftsman, John Deere, Cub Cadet) and your spindle uses a 3/4” bearing with a 3” offset hub, this is a solid choice. It’s easy to install and well-reviewed for the price. Skip it if you require OEM parts or a different offset/bearing size.