2Pack 15x6.00-6 Tire and Wheel Assembly, Replacement for Craftsman John Deere Cub Cadet Riding Mowers, 4 Ply Tubeless Lawn Mower Tires 15x6x6, 3" Centered Hub, 3/4" Bushing

What It Is

This is a 2-pack of 15x6.00-6 tire and wheel assemblies, designed as a direct replacement for the front or rear tires on many riding mowers from Craftsman, John Deere, and Cub Cadet. They are tubeless, 4-ply tires with a 3" centered hub and a 3/4" bushing, ideal for residential lawn tractors and zero-turn mowers.

Fitment & Compatibility

Before buying, verify these three things:

• Tire size: Must be 15x6.00-6 (15" outer diameter, 6" width, 6" rim). Check your current tire sidewall for these numbers.
• Hub center: This has a 3" centered hub. Measure the distance from the center of your wheel to the inside of the rim flange. If your mower uses an offset hub (common on some Craftsman or John Deere models), this won’t fit.
• Bushing/axle: Comes with a 3/4" bushing. If your axle is 5/8" or 1", you’ll need a different bushing or adapter. Also confirm the bolt pattern (usually 4 on 4" or 4 on 5.5") matches your mower’s wheel studs.

Common compatible models include Craftsman LT1000/2000 series, John Deere D100/110/130, and Cub Cadet LTX1040/1050. This is an aftermarket part—OEM numbers for reference are John Deere GY20570, Cub Cadet 734-04107, and Craftsman 532198651.

Key Things to Know

• Quality: 4-ply rating is standard for residential use—adequate for flat yards, but not for heavy commercial loads or rocky terrain. Expect 2-3 seasons of typical mowing.
• Installation: Easy bolt-on job if fitment matches. Remove the old wheel, slide on the new one, and tighten lug nuts to 40-50 ft-lbs. No tire mounting required.
• Common gotcha: The 3" centered hub is the most frequent mismatch. Measure twice—many Craftsman and John Deere mowers use a 2.5" offset hub. Also check the valve stem location; it may interfere with the mower deck if too close.
• Tubeless: No inner tube needed, but ensure the bead seats fully when inflating to 20-25 PSI (max 30 PSI). Use soapy water to check for leaks.

Should You Buy It

If your mower has a 15x6.00-6 tire with a 3" centered hub and 3/4" axle, this is a solid, affordable replacement. It’s best for homeowners with older Craftsman, John Deere, or Cub Cadet tractors needing a quick, no-fuss swap. Avoid if your mower uses offset hubs or odd bolt patterns—measure first.