2pack 11-inch Lawnmower Walk-Behind Mowers Wheels Replacement for Husqvarna 585265603 fits HU700H LC221RH HD800HW HU800H

What It Is

This is a 2-pack of 11-inch replacement wheels designed for Husqvarna walk-behind mowers, intended for models like HU700H, LC221RH, HD800HW, and HU800H. They replace worn or damaged rear wheels to restore smooth rolling and maneuverability.

Fitment & Compatibility

Before buying, confirm these three things:

• Model number – Fits Husqvarna HU700H, LC221RH, HD800HW, HU800H, and others using OEM part 585265603. Check your mower’s model plate (usually under the seat or on the deck).
• Axle size – These wheels use a 5/8-inch axle hole. Measure your existing axle diameter; if it’s 3/4-inch, they won’t fit.
• Tire dimensions – 11-inch diameter, 2.5-inch width. Verify your old wheel’s size (marked on sidewall). Deck clearance must allow for this size.

Aftermarket replacement, not OEM. No other brands listed as compatible.

Key Things to Know

• Installation difficulty – Easy. Remove the cotter pin or clip, slide off old wheel, slide on new one, and re-secure. No special tools needed.
• Quality – Solid rubber tires with plastic hubs. Good for flat residential lawns, but not for rough terrain or heavy commercial use.
• Common gotcha – The hub hole is 5/8-inch, but some Husqvarna models use a 3/4-inch axle. Measure before buying.
• Warranty – Check seller’s return policy; no manufacturer warranty on aftermarket parts.

Should You Buy It

Buy these if you have a compatible Husqvarna model (listed above) with a 5/8-inch axle, need a quick, low-cost fix for worn rear wheels on a residential mower, and don’t mind aftermarket parts. Skip them if you need OEM quality, have a different axle size, or mow rough, bumpy ground.