220336 Eight (8) Hanger Blade Links Fits Ford Flail Mower 907

What It Is

This set of eight hanger blade links (part number 220336) is a direct replacement for the pivoting blade hangers on Ford 907 series flail mowers. They connect the flail blades to the rotor drum, allowing the blades to swing freely and absorb impacts.

Fitment & Compatibility

Check these before buying:

• Model fit: Designed specifically for Ford 907 flail mowers. Does not fit 906, 908, or other Ford flail models unless confirmed by cross-reference.
• OEM vs aftermarket: This is an aftermarket set (brand: Eight) meant to replace OEM Ford part 220336. Measure your existing hanger links—center-to-center hole distance should be approximately 2.5 inches, with a pin diameter of 3/8 inch.
• Count: Includes eight links. Verify your rotor has exactly eight hanger stations (common on 907 models). Some configurations may require more or fewer.
• Blade style: These links are for standard “Y” or “paddle” flail blades. Not compatible with knife-style or offset blade mounts.

Key Things to Know

• Material quality: Made from hardened steel. Check for burrs on the pin holes—file smooth if needed to prevent premature wear on the rotor pins.
• Installation difficulty: Moderate. You’ll need a punch, hammer, and needle-nose pliers to drive out old pins and seat new ones. Expect 30–60 minutes for all eight.
• Common gotcha: The supplied cotter pins may be slightly undersized. Have a few 3/32-inch cotter pins on hand as backups.
• Longevity: With proper lubrication, these should last 2–3 seasons in residential use. In heavy commercial or rocky conditions, inspect every 25 hours for elongation of the pivot holes.

Should You Buy It

Buy this set if you own a Ford 907 flail mower and need to replace worn or broken hanger links. It’s a solid aftermarket option at a fair price for the quantity. Skip it if you have a different Ford flail model or if your rotor requires more than eight links—measure first to avoid a mismatch.