21180 - Swisher Response 38" Lawn Striper Wheel Kit

What It Is

The Swisher 21180 Response 38" Lawn Striper Wheel Kit is a bolt-on accessory that adds a weighted, rolling striper wheel to the rear of a zero-turn or lawn tractor. It presses stripes into turf behind the mower deck, giving a professional striped lawn look without a separate roller or drag kit.

Fitment & Compatibility

Deck size: Designed for 38-inch Swisher Response mowers (model 21180 is the wheel kit for the 38" deck). Not for other deck widths or brands without modification.
Model check: Fits Swisher Response series zero-turn mowers only—confirm your mower model number includes “Response 38” before buying.
Mounting: Bolts directly to the rear frame of the mower using existing holes (no drilling required for compatible models).
Measurements: The wheel is approximately 8 inches in diameter and mounts on a pivoting arm. Verify clearance behind your deck—the arm extends rearward about 10-12 inches.
OEM vs aftermarket: This is an OEM Swisher part. No universal or third-party alternatives exist for this specific fit.

Key Things to Know

• Weight matters: The kit includes a weighted wheel and spring-tension system. If your lawn is soft or wet, the wheel may dig in instead of stripe—adjust tension or remove the weight for drier conditions.
• Installation: Moderate difficulty—30-60 minutes. Requires basic wrenches and possibly a helper to hold the wheel arm in place while tightening bolts. No special tools needed.
• Common gotcha: The wheel can contact the deck discharge chute on tight turns. Test full left/right steering lock before final tightening; you may need to adjust the arm angle slightly.
• Durability: Steel construction with a solid rubber wheel. Holds up well for residential use, but the pivot bushing can wear over time—check for play annually.

Should You Buy It

Buy this if you own a Swisher Response 38" mower and want deep, uniform lawn stripes without dragging a separate roller. It’s a solid, purpose-built upgrade that integrates cleanly, but it’s not a universal striper—skip it if you have a different deck size or brand, as it won’t fit without fabrication.