2105200320A Lawn Mower Blade, Compatible with 22" Daye/Hyper Tough, Snapper Mower Deck, Fit for MNA152701, MNA153002, Replace 84005313 with Round Center Holes and Two Oval Side Holes

What It Is

This is a replacement lawn mower blade designed for 22-inch walk-behind mower decks, specifically compatible with Daye, Hyper Tough, and Snapper models. It’s a standard lift blade for cutting grass in residential yards.

Fitment & Compatibility

Before buying, verify three things: your deck size must be exactly 22 inches (measure blade tip to tip if unsure). The blade uses a round center hole (approx. 1 inch) and two oval side holes—check your old blade matches this pattern. It fits models MNA152701, MNA153002, and replaces OEM part 84005313. This is an aftermarket blade, not Snapper OEM, so confirm your mower brand and model number against those listed. Avoid if your blade has a star or square center hole.

Key Things to Know

• Quality: Made from hardened steel with a painted finish. Users report it’s sharp out of the box and holds an edge well for typical home use. Slightly thicker than some OEM blades, which may improve durability.
• Installation: Easy—remove the old blade, clean the spindle, and bolt the new one on. Use a torque wrench to tighten to 30-40 ft-lbs (check your mower manual). The blade is balanced, but it’s wise to re-balance after sharpening.
• Common Gotcha: The oval side holes are slightly offset—ensure they align with your spindle pins or bolts. If your mower uses a different hole pattern (e.g., two round holes), this won’t fit.
• Compatibility Note: Works on most 22” Daye and Hyper Tough models, but some newer Hyper Tough units may have a different spindle design—measure before buying.

Should You Buy It

Yes, if you own a 22-inch Daye, Hyper Tough, or Snapper mower with the round-center/oval-side-hole pattern and want a reliable, affordable blade for regular lawn cutting. It’s a solid value at $23.99 for home use, but skip it if you need OEM exactness or have a non-standard hole pattern.