20x10.00-8 Lawn Mower Tires with Rim,20x10x8" Tubeless Tractor Tires, 2-Pack Tire and Wheel Assembly,4 Lug 2.83" Borehole 0.59"Lug Valve Hole,4 Ply for Riding Mowers Lawn Tractors

What It Is

This is a 2-pack of 20x10.00-8 tubeless tire and wheel assemblies designed for riding mowers and lawn tractors. They’re a direct replacement for rear drive tires on machines like Craftsman, Husqvarna, John Deere, and similar brands.

Fitment & Compatibility

Before buying, confirm four measurements:

• Tire size: 20x10.00-8 (20” tall, 10” wide, fits 8” rim).
• Bolt pattern: 4-lug with a 2.83” borehole (center hole diameter). Measure your existing wheel’s center hole—many tractors use 2.75” or 3.00”, so 2.83” is a non-standard size that may require a hub adapter or reaming.
• Lug valve hole: 0.59” (matches standard valve stems).
• Rim offset: Check if your mower uses a 3.5” or 4” offset. These have a 3.5” offset (backspacing). Measure from mounting face to inner rim edge—wrong offset can cause rubbing on the deck or frame.

Not all 4-lug mowers share the same lug pattern. Measure center-to-center distance on your existing lugs (common patterns: 4x4.00”, 4x4.50”). These are likely 4x4.00”. If your pattern is different, they won’t fit.

Key Things to Know

• 4-ply rating: Good for residential turf and light-duty use, but not for heavy loads or rough terrain. Avoid aggressive turning on pavement.
• Installation: Pre-assembled and tubeless—mount directly, inflate to 14-18 PSI. No tube needed. Check valve stem clearance before tightening.
• Quality note: Some users report slight wobble at high speed (above 8 mph). Not an issue for most mowers, but check rim runout with a dial indicator if you’re sensitive.
• Borehole fit: 2.83” may be loose on a 2.75” axle hub. Use a centering ring or shim if needed. If your axle hub is 3”, these won’t fit without modification.

Should You Buy It

Buy this if you need a budget-friendly, ready-to-install rear tire set for a standard residential riding mower with a 4x4.00” lug pattern and 2.83” borehole. Avoid if your mower uses a different bolt pattern, offset, or requires a higher ply rating for commercial use.