2 PCS 15x6.00-6 Lawn Mower Tires and Wheel, Tire Assembly Replacement for Riding Lawn Mower Front Tires, 3/4" Bearing, 3" Centered Hub, 4 Ply Pneumatic

What It Is

This is a set of two 15x6.00-6 pneumatic tires pre-mounted on wheels with a 3/4" ball bearing and a 3" centered hub. Designed as direct replacements for front tires on riding lawn mowers and garden tractors, they handle general mowing and light turf work.

Fitment & Compatibility

Before buying, verify three things:

• Tire size – Must be 15x6.00-6 on your current tires (check sidewall stamp). This is a common front size for many John Deere, Cub Cadet, Husqvarna, and MTD riders.
• Hub dimensions – The wheel has a 3/4" bearing bore and a 3" centered hub. Measure your axle diameter (must be 3/4") and hub pilot hole depth. Centered hub means the tire is centered on the wheel, so offset won’t match non-centered OEM wheels.
• Bolt pattern – These use a 4-bolt pattern. Confirm your spindle matches (most common on 2000s-era riders). If your OEM wheels have a 5-bolt pattern or different offset, these won’t fit.

Key Things to Know

• Quality vs. OEM – 4-ply rating is adequate for front tires on residential mowers. Not heavy-duty enough for rough terrain or zero-turn rear positions.
• Installation – Simple bolt-on swap. No tire mounting or balancing needed. May require reusing your old valve stems if included ones are low-quality plastic.
• Common gotcha – The 3" centered hub may sit slightly inward or outward compared to some OEM offset wheels. Check clearance against the mower frame and steering spindles before tightening.
• Pressure – Recommended at 15–20 psi. Overinflating can cause a harsh ride and uneven wear.

Should You Buy It

This is a solid budget-friendly choice if you need quick, bolt-on front tire replacements for a standard riding mower with a 3/4" axle and 4-bolt pattern. Avoid if you require heavy-duty, off-road traction, or if your mower uses a non-centered hub or odd bolt pattern.