2 Pcs 13x5.00-6 Tire and Wheel,Replacement 13x5-6nhs Flat Free Riding Lawn Mower Front Tires,With 3" Centered Hub and 3/4" Bearings,Turf-V Pattern,Compatible with Zero-Turn Mower

What It Is

This is a set of two 13x5.00-6 flat-free (puncture-proof) front tires with wheels, designed specifically for riding lawn mowers and zero-turn mowers. The turf-friendly tread pattern minimizes lawn damage while providing stable front-end support for mowing and light utility use.

Fitment & Compatibility

Before purchasing, verify these three measurements:

• Tire size: 13x5.00-6 (also listed as 13x5-6 NHS). This is a common front tire size for many zero-turn and garden tractors, but double-check your current tire sidewall for the exact size.
• Hub center hole: 3/4" bearing. Measure your axle diameter—must be exactly 3/4". Common on brands like Husqvarna, Craftsman, John Deere, and Ariens zero-turns.
• Bolt pattern: 3" centered hub (uses 3" center-to-center lug spacing). Count your wheel studs (typically 4 or 5) and measure across two opposite studs. If your pattern differs, these won’t mount.

Not compatible with mowers requiring a 4" or 5" hub, or axles larger than 3/4". Aftermarket replacement—not OEM-specific, so confirm your current wheel measurements.

Key Things to Know

• Flat-free = no air maintenance: Solid foam core eliminates flats, but ride is stiffer than pneumatic. Expect more vibration on rough terrain.
• Turf-V pattern: Designed for traction without tearing up grass—good for lawns, not for mud or heavy slopes.
• Installation difficulty: Easy—remove old wheel, slide on new one, tighten lug nuts to 40-50 ft-lbs. No tire mounting or inflation needed.
• Common gotcha: The 3" centered hub may be too small for some mowers with 4" or 5" hubs. Always measure before ordering. Also, the 3/4" bearing is standard, but some older models use 5/8" or 1"—verify axle diameter.

Should You Buy It

Buy this if you need a direct replacement for worn or flat front tires on a zero-turn or riding mower with a 13x5.00-6 tire size, 3" centered hub, and 3/4" axle. It’s a solid value for hassle-free, flat-free operation, ideal for flat, well-maintained lawns. Avoid if your hub pattern or axle size differs, or if you need pneumatic tires for a cushier ride on bumpy ground.