2 Pcs 13x5.00-6 Lawn Mower Pneumatic Tire and Wheel, 13X5.00-6 Front Riding Mowers Tire with 3/4" 5/8" Bushings, 3" -4.5" Centered Hub, 13x5-6 Tube with TR13 Valve Stem, 375 LBS

What It Is

This is a set of two pneumatic front tires and wheels (13x5.00-6) designed for riding lawn mowers, garden tractors, and zero-turn mowers. They replace worn or damaged front tires, providing a 375-lb load capacity per tire for stable turf-friendly rolling.

Fitment & Compatibility

Before buying, confirm these four measurements:

• Tire size: 13x5.00-6 (13" diameter, 5" wide, fits a 6" rim). This is a common front tire size for many John Deere, Cub Cadet, Husqvarna, and MTD riding mowers.
• Axle hole: The included bushings allow fitment on 3/4" or 5/8" axles. Check your mower’s axle diameter—most front axles are 5/8" or 3/4".
• Hub center: The hub is centered with a bolt pattern that fits 3" to 4.5" bolt circles. Measure the distance between two opposite bolt holes on your old wheel to verify.
• Wheel offset: This is a centered hub design. If your mower uses an offset wheel (e.g., for deck clearance), this may not fit. Check the offset by comparing your old wheel’s mounting face position.

No specific brand or model guarantees—always measure your existing wheel’s bolt pattern, axle size, and offset.

Key Things to Know

• Easy installation: Tires come pre-mounted on rims with tubes installed and inflated. You just bolt them on. No tire mounting or balancing required.
• Tube valve stem: Uses a TR13 (straight metal) valve stem—common and easy to air up. No special adapter needed.
• Load capacity: 375 lbs per tire is plenty for most residential riding mowers (typically 400–600 lbs total front weight). Not for heavy commercial use.
• Gotcha: The 3"–4.5" bolt pattern range means the wheel has multiple hole sets. You may need to rotate the wheel to align the correct holes with your mower’s spindle. Verify hole alignment before tightening.

Should You Buy It

Buy this if you need a direct, no-hassle replacement for a 13x5.00-6 front tire with a centered hub and 3/4" or 5/8" axle. It’s a solid value for residential mowers—just confirm your bolt pattern and offset first. Skip if you need an offset wheel or a different tire size.