2 PCS 11x4.00-5 Flat Free Lawn Mower Tire and Wheel with 3/4" 5/8" Bearing,3.4"-4.8" Centered Hub,11x4-5 Solid Front Smooth Tread Tire for Zero Turn Mowers For Residential and Commercial, 350Lbs Load

What It Is

This is a set of two 11x4.00-5 flat-free (solid) front tires with wheels, designed for zero-turn mowers. The solid construction eliminates flats, making it ideal for residential and commercial mowers used on rough terrain or debris-prone areas.

Fitment & Compatibility

Before buying, check these measurements:

• Tire size: 11x4.00-5 (11" diameter, 4" width, 5" rim). Verify your current tire size matches.
• Bearing: 3/4" inner diameter (comes with a 5/8" adapter). Measure your axle shaft diameter—most zero-turn front axles are 3/4" or 5/8".
• Hub width: 3.4" to 4.8" centered hub. Measure your existing wheel hub width and ensure it fits within this range.
• Load capacity: 350 lbs per tire (700 lbs total). Fine for most residential zero-turn mowers but check your mower’s front axle weight rating.
• Bolt pattern: Centered hub—no offset. Will not fit mowers requiring offset wheels (e.g., some older Craftsman or MTD models).

Key Things to Know

• No maintenance: Flat-free means no air checks, no punctures. Ride is stiffer than pneumatic, especially on bumpy lawns.
• Easy install: Direct bolt-on if your axle size and hub width match. You may need to reuse your existing axle washers or spacers.
• Smooth tread: Designed for turf traction, not aggressive off-road use. Can slip on wet grass or steep slopes.
• Adapter included: 5/8" bearing adapter is included. Ensure you don’t lose the spacer ring if switching between axle sizes.

Should You Buy It

Buy this if you want a durable, low-maintenance front tire upgrade for a zero-turn mower with a 3/4" or 5/8" axle and a centered hub. It’s a solid choice for residential and light commercial use where flats are a problem, but skip it if you need offset wheels or a softer ride for bumpy terrain.