(2-Pack) 20x10.00-8 Tire and Wheel Assembly,Tubeless Lawn Mower Tire with Rim, 20x10x8 Rear Tires,3/4" Borehole, and 3/16" Keyway, 3.5" Offset Hub,Fit for Most Riding Mower,Garden Lawn Tractor

What It Is

This is a set of two rear tire and wheel assemblies (20x10.00-8) designed for riding mowers and garden tractors. They come pre-mounted on steel rims with a 3/4" bore and 3/16" keyway, making them a direct replacement for worn-out rear tires on most zero-turn mowers, lawn tractors, and garden tractors.

Fitment & Compatibility

Before buying, verify these three measurements:

• Tire size: Must be 20x10.00-8 (20" diameter, 10" wide, 8" rim). Not compatible with 20x8-8 or 20x12-8.
• Bore and keyway: Hub bore is 3/4" with a 3/16" keyway. If your axle is 5/8" or 1", this won’t fit without an adapter.
• Offset: 3.5" offset hub means the mounting surface is offset 3.5" from center. Measure your current wheel’s offset to avoid rubbing or axle misalignment.

Common fits: Cub Cadet, John Deere, Husqvarna, Craftsman, Troy-Bilt, and many other riding mowers with rear axles using a 3/4" bore. Always measure your existing wheel’s offset and bore before ordering.

Key Things to Know

• Tubeless design: Tires are tubeless, but the rims have a standard valve stem. No need to buy inner tubes unless the bead leaks.
• Installation difficulty: Easy—just remove the old tire assembly, slide the new one onto the axle, align the keyway, and tighten the axle nut. No special tools needed.
• Weight capacity: These are light-duty to medium-duty tires. Not suited for heavy commercial use or steep slopes.
• Common gotcha: The 3.5" offset may push the tire outward or inward compared to your OEM wheel. Measure offset carefully—too much change can affect steering or deck clearance.

Should You Buy It

Buy this if you need a budget-friendly, direct-fit replacement for a worn rear tire on a standard riding mower or garden tractor with a 3/4" axle. It’s a solid value for home-use machines, but skip it if you have a commercial mower, need a different offset, or require a larger bore size.