1716696ASM High Lift Blades for 44" Mower Deck, Compatible with Simplicity Broadmoor Landlord Snapper, Replaces 1716696 1727774 1727774ASM 1704100 1704100ASM, 3 Pack

What It Is

This is a set of three high-lift blades designed for 44-inch mower decks, intended to improve grass clipping discharge and bagging performance on Simplicity Broadmoor, Landlord, and Snapper models. They are an aftermarket replacement for OEM part numbers 1716696, 1727774, 1727774ASM, 1704100, and 1704100ASM.

Fitment & Compatibility

Before purchasing, verify your mower deck is exactly 44 inches (measured blade tip to blade tip). These blades fit Simplicity Broadmoor and Landlord series, plus Snapper models with a 44-inch deck—check your owner’s manual or existing blade part number. Measure the blade length (should be ~14.5 inches), center hole diameter (typically 5/8-inch or 7/8-inch), and spindle pattern (usually a 5-point star or 2-hole). Confirm your deck uses three blades, not two. Aftermarket blades may have slight weight or thickness differences from OEM—ensure they clear your deck housing and discharge chute.

Key Things to Know

• High-lift design: These blades create more airflow for better bagging and side discharge, but they increase engine load and may cause scalping on uneven terrain if deck height is set too low.
• Installation: Use a torque wrench to tighten blade bolts to 70–90 ft-lbs (check your manual). Never reuse old bolts—buy new ones if needed. Always disconnect the spark plug and block the blade before working.
• Sharpening: High-lift blades dull faster than standard blades, especially on sandy or rocky lawns. Plan to sharpen them every 10–15 hours of use, or replace when nicked or bent.
• Lift height: These blades produce more lift than OEM low-lift options, so adjust your deck height slightly higher to avoid scalping or excessive wear on the blade tips.

Should You Buy It

If you have a Simplicity Broadmoor, Landlord, or Snapper with a 44-inch deck and you primarily bag clippings or want better discharge performance, this three-pack is a good value. It’s not ideal for mulching (use dedicated mulching blades) or for decks with low clearance. Check your spindle pattern and bolt size first, but for most compatible models, this is a solid upgrade over standard blades.