Wheels & Tires

15x6.00-6 Lawn Mower Tire and Wheel, Replacement for John Deere Craftsman Husqvarna Riding Mowers, 4 Ply Tubeless Lawn Mower Tires 15x6x6, 500lbs Capacity, 3" Offset Hub, 3/4" Bushing, 2 Pack

4.4/5 (122 reviews)
$59.39
15x6.00-6 Lawn Mower Tire and Wheel, Replacement for John Deere Craftsman Husqvarna Riding Mowers, 4 Ply Tubeless Lawn Mower Tires 15x6x6, 500lbs Capacity, 3" Offset Hub, 3/4" Bushing, 2 Pack
As an Amazon Associate, Mowers.Cloud earns from qualifying purchases.

Check current price, fitment notes, and availability on Amazon:

🛒 See Price on Amazon

What It Is

This is a set of two 15x6.00-6 tubeless lawn mower tires mounted on 3-inch offset steel wheels, designed for front or rear use on riding mowers and garden tractors from John Deere, Craftsman, and Husqvarna. Each tire supports up to 500 lbs and is built with a 4-ply rating for light-duty residential mowing, snow removal, or towing light carts.

Fitment & Compatibility

Before buying, confirm these three measurements on your current wheel:

  • Tire size: Must be 15x6.00-6 (15″ outer diameter, 6″ wide, 6″ rim). Common on many riding mower front axles.
  • Center hole/bushing: This wheel comes with a 3/4″ bushing. If your axle is 5/8″ or 1″, you’ll need to swap the bushing or buy a different wheel.
  • Offset: The 3″ offset is for front axles on most John Deere, Craftsman, and Husqvarna models. It will not fit rear axles on most tractors (rear wheels typically use 0–1″ offset). Measure your old wheel’s offset from the mounting face to the rim center.

Check your mower’s OEM part number (e.g., John Deere AM137211, AM137210, or Craftsman 130-006) for direct fit. This is an aftermarket replacement, not OEM.

Key Things to Know

  • Installation difficulty: Easy—no tire mounting required. Just bolt the wheel onto the axle and tighten the nut. Torque to 30–40 ft-lbs.
  • Quality: 4-ply rating is adequate for residential mowing on flat lawns. Not for heavy commercial use or rough terrain. Some users report slight wobble at high speeds.
  • Tubeless design: No inner tube needed, but the rim may leak air if the bead isn’t seated perfectly. Use a tire sealer if you get slow leaks.
  • Common gotcha: The 3″ offset means the tire sits farther out from the mower frame. If your machine has tight clearance (e.g., near the deck or steering linkage), this may rub.

Should You Buy It

This is a solid budget-friendly choice for replacing worn front tires on a standard residential riding mower from John Deere, Craftsman, or Husqvarna. It’s not for heavy-duty or commercial use, and you must confirm your axle size and offset first. If you need a direct OEM match or a higher ply rating for rough ground, look elsewhere.

Related Parts & Accessories

← More Wheels & Tires