13x5.00-6 Tire and Wheel Assemblies (2 Pack),13 x 5 x 6 Tubeless Rubber Tires and Wheel for Riding Lawn Mower - With 3/4" Bushings (Extra 5/8" Bushings) and 3" Centered Hub (Yellow)

What It Is

A 2-pack of 13x5.00-6 tubeless rubber tires pre-mounted on 6-inch wheels with a 3-inch centered hub. Designed for rear-wheel replacement on riding lawn mowers, garden tractors, and zero-turn mowers that use this common tire size.

Fitment & Compatibility

Before buying, verify three things:

• Tire size: Must be 13x5.00-6 (13" diameter, 5" width, 6" rim). Check your old tire sidewall.
• Hub center hole: This wheel has a 3" centered hub. Measure your axle diameter—it comes with 3/4" bushings (plus extra 5/8" bushings) but won’t fit axles smaller than 5/8" without additional adapters.
• Bolt pattern: No bolt pattern—this is a hub-centered design that uses a single axle bolt or cotter pin. Not compatible with 4-bolt or 5-bolt wheel patterns.

Common on older MTD, Craftsman, Husqvarna, John Deere, and Troy-Bilt rear axles, but always measure your axle diameter and hub depth. Not for front wheels (usually smaller) or zero-turn caster wheels.

Key Things to Know

• Bushings included: 3/4" ID bushings are pre-installed; extra 5/8" bushings are loose. You may need to swap them if your axle is 5/8".
• Tubeless design: No inner tube to install or replace. Just mount and inflate to 15-20 PSI max (check sidewall).
• Installation difficulty: Easy—jack up mower, remove old wheel, slide on new one, secure with axle hardware. No special tools needed.
• Common gotcha: The 3" centered hub may be too shallow for some mowers with longer axles or dust caps. Check that your axle protrudes less than 1.5" past the hub face.

Should You Buy It

If you need a direct replacement for a 13x5.00-6 rear tire on a riding mower with a 3/4" or 5/8" axle and don’t require a bolt pattern, this 2-pack offers good value at $69.99. It’s a solid budget option for older tractors, but verify hub depth and axle diameter first—returning wheels that don’t fit is a hassle.