13x5.00-6 Lawn Mower Tires (Set of 2), 4Ply Tubeless Turf Tires for Riding Mower Garden Tractor, Turf Saver Lawn Mower Tires 13x5x6, 440 LBS Capacity

What It Is

This is a set of two 13x5.00-6 turf saver tires designed for riding mowers and garden tractors. They are tubeless, 4-ply rated, and built for use on lawns, not pavement, with a 440 lbs load capacity per tire.

Fitment & Compatibility

Before buying, verify three things:

• Size: The tire is 13 inches tall, 5 inches wide, and fits a 6-inch rim. Measure your current tire’s sidewall markings—if it says 13x5.00-6, these will fit.
• Rim width: These tires mount on rims 3.5 to 4.5 inches wide. Measure your rim’s inner bead width if unsure.
• Application: They are for front or rear positions on most riding mowers (e.g., John Deere, Craftsman, Husqvarna, MTD) but only if the original tire size matches. Not for zero-turn mowers or small walk-behinds.

Check that your mower’s lug pattern and axle diameter match—these are tire-only, no rims included.

Key Things to Know

• Quality: 4-ply rating means decent puncture resistance for light mowing, but sidewalls are softer than 6-ply. Not for heavy loads or rough terrain.
• Installation: Mounting is DIY if you have tire spoons and a bead breaker. Tubeless design seals on rim without tubes, but check rim condition for rust or dents.
• Common gotcha: These are “turf saver” tread—shallow, smooth, and lawn-friendly. They offer minimal traction on wet grass or slopes. Not for mud or snow.
• Load limit: 440 lbs per tire is fine for most riding mowers (total ~880 lbs), but verify your mower’s weight plus operator.

Should You Buy It

If you need a budget-friendly, direct replacement for worn 13x5.00-6 turf tires on a standard riding mower used on flat, dry lawns, these work well. Avoid them if you need aggressive tread, higher load capacity, or fitment for a zero-turn or commercial mower.