131-4547-03 Mulching Blades Compatible with 22" Toro Recycler 20016 20017 20031 20041 20065 20070 20071 20073 20330 20330C Walk-Behind Mower, Replace for 104-8697-03,2 Pack

What It Is

This is a 2-pack of mulching blades (model 131-4547-03) designed for 22-inch Toro Recycler walk-behind mowers. They replace OEM part 104-8697-03 and are intended for fine grass clipping recutting and lawn nutrient recycling.

Fitment & Compatibility

• Deck size: Fits only 22-inch cutting decks (not 21" or 30").
• Exact models: Toro Recycler models 20016, 20017, 20031, 20041, 20065, 20070, 20071, 20073, 20330, 20330C.
• OEM replacement: Directly replaces Toro part 104-8697-03. Aftermarket compatible, but verify blade length (approx. 22" overall) and center hole diameter (typically 1" or 7/8") matches your spindle.
• Check before buying: Remove your current blade and measure length end-to-end and center hole diameter. Also confirm your mower’s model number (stamped under the seat or on the deck) is in the list above. These are not for bagging or side-discharge decks.

Key Things to Know

• Mulching only: These blades have a high-lift design for recutting clippings inside the deck. They won’t work well for bagging or side discharge.
• Installation: Simple swap with a socket wrench and blade removal tool. Torque to 40-50 ft-lbs. Use thread locker if your spindle is worn.
• Sharpness: Blades come sharp but dull quickly on sandy soil or wet grass. Expect to sharpen after 10-15 hours of use.
• Common gotcha: Aftermarket blades may be slightly thinner than OEM, causing vibration. Check balance before installing (hang on a nail or use a blade balancer).

Should You Buy It

If you own a 22" Toro Recycler from the listed models and want fine mulching with less bagging, this is a reliable, budget-friendly replacement. It’s a direct fit, easy to install, and well-reviewed for performance. Skip if you need a bagging blade or have a different deck size.