11x6.00-5 Flat Free Tire,2 Pack 11x6.00-5 Tires for Zero Turn Mower With 3/4 & 5/8" or 1/2" Bearing,6"-8" Centered Hub,11x6-5 Lawn Mower Tires Flat Free,Load 400lbs

What It Is

This is a 2-pack of 11x6.00-5 flat-free tires designed for zero-turn mowers. They eliminate punctures and air pressure maintenance, ideal for residential or light commercial use on rough terrain, gravel, or debris-heavy lawns.

Fitment & Compatibility

Before buying, verify these three measurements:

• Tire size: Must be 11x6.00-5 (also listed as 11x6-5). Measure your current tire’s sidewall markings.
• Bearing size: This set includes three bearing options: 3/4", 5/8", or 1/2" inner diameter. Confirm your axle size. Most zero-turn mowers use 3/4" or 5/8".
• Hub offset: The hub is centered with a 6"-8" diameter. Measure your wheel hub’s bolt pattern (typically 4 on 4" or 4 on 6") and ensure the hub fits without rubbing the frame or deck.

Brand/model fit: Not universal. Fits most standard zero-turn mowers (e.g., Toro, Husqvarna, John Deere, Cub Cadet) but check clearance—flat-free tires are slightly stiffer and may require 1/2" extra clearance around the wheel well.

OEM vs aftermarket: Aftermarket replacement. No adapters included for non-standard axles.

Key Things to Know

• Load capacity: Rated 400 lbs per tire, enough for most residential zero-turn mowers (total machine weight + operator under 800 lbs). Heavier commercial decks may exceed this.
• Installation: Moderate difficulty. You’ll need a socket set and possibly a bearing puller. The bearings are pre-installed but may need re-greasing. No tire mounting required—just bolt on.
• Ride quality: Firmer than pneumatic tires. Expect more vibration on hard surfaces. Not recommended for hilly or extremely bumpy lawns.
• Longevity: Flat-free design lasts 2-3 years in typical use, but UV exposure and heavy loads can shorten life. Avoid prolonged direct sunlight storage.

Should You Buy It

Buy these if you’re tired of fixing flats on a residential zero-turn mower and your lawn is mostly flat with moderate debris. Skip them if you need a soft ride for hilly terrain, have a heavy commercial mower, or require exact OEM fitment without measuring first.