11x4.00-5 Lawn Mower Tire and Wheel Assembly, 2 Pack Tubeless Front Tires for Zero Turn Mowers, Smooth Turf Tire with Bearings, 264 lbs Capacity - Wiltire

What It Is

This is a 2-pack of 11x4.00-5 front tire and wheel assemblies for zero-turn mowers, designed for smooth turf traction on residential or light-commercial mowers. The tubeless tires come with pre-installed bearings and a 264 lb capacity per tire.

Fitment & Compatibility

Before buying, check these three things:

• Tire size: Must be 11x4.00-5 (11” tall, 4” wide, 5” rim diameter). Measure your current front tire’s sidewall markings.
• Bolt pattern: These wheels use a standard 5/8” bore with two 5/16” bolt holes on a 2.75” center. Verify your mower’s hub pattern matches.
• Offset: The wheel offset is 1.5” (center of rim to mounting surface). Measure your current wheel’s offset to avoid steering or clearance issues. Common on brands like Ariens, Gravely, Husqvarna, and Cub Cadet zero-turns with this size.

Key Things to Know

• Quality: Budget-friendly with decent tread life for smooth turf, but not for heavy mud or rocky terrain. Bearings are sealed and pre-greased.
• Installation: Direct bolt-on if measurements match. No tire mounting or balancing needed. Tools required: socket wrench for lug nuts.
• Gotcha: The 264 lb capacity is per tire, but combined front axle load on zero-turns often exceeds that. If your mower weighs over 500 lbs total, check front axle weight rating.
• Tubeless design: No inner tube to replace, but rim seal must be clean for air retention. If leaking, check bead seating.

Should You Buy It

This is a solid value if you need a direct replacement for worn front tires on a residential zero-turn mower that stays on lawns. It’s not for heavy commercial use or rough terrain. Verify bolt pattern and offset before ordering—most common zero-turns with 11x4.00-5 fronts will fit, but always measure first.