117-1018 V-Belt Replacement for Toro 22 inch Recycler 20330 20331 20350 20351 Lawn Mower Deck Drive Belt

What It Is

The 117-1018 V-belt is a deck drive belt for Toro 22-inch Recycler mowers, connecting the engine pulley to the blade spindle to spin the cutting blade. It fits specific 22-inch models from the 2000s–2010s, including the 20330, 20331, 20350, and 20351.

Fitment & Compatibility

Before buying, verify your mower’s model number (on a sticker under the seat or near the rear wheel). This belt fits only those four Toro Recycler models—not newer 22-inch Recyclers or other Toro series (like Super Recycler or Personal Pace). Measure your old belt: OEM length is 37.5 inches, width 0.5 inches, and it uses a standard V-cross-section. Aftermarket belts labeled 117-1018 or “Toro 117-1018” will work, but check that the number matches exactly. Do not use on 21-inch or 20-inch decks.

Key Things to Do

• Check for wear first – Look for cracking, fraying, or glazing on the old belt. Replace if it slips or squeals during operation.
• Installation is moderate – You’ll need to remove the blade, belt cover, and possibly the spark plug wire for safety. Route the belt exactly over the engine pulley and blade spindle pulley, following the deck diagram.
• Common gotcha – The belt can be tight; use a belt tool or screwdriver to lever it onto the pulley. Don’t force it—damage to the belt or pulley is possible.
• Aftermarket vs. OEM – This listing is likely an aftermarket belt. OEM Toro belts cost more but may last slightly longer. For occasional home use, this aftermarket belt is fine.

Should You Buy It

If you own one of the listed Toro 22-inch Recycler models and the belt is worn or broken, this is a cost-effective, well-rated replacement for DIY maintenance. It’s best for homeowners who mow a standard lawn and want a quick fix without paying OEM prices. For heavy commercial use, consider OEM for extra durability.