115-9649-03 High Lift Blades Fit for Toro 60" Decks TimeCutter Titan Z Master Max ZX MX 6000 6020 6050 6080 Zero Turn Mower Replace 105-7718-03 038-6050-00 133-2127 103-2530 115-9649-03p

What It Is

This is a set of three high-lift blades designed for Toro 60-inch zero-turn mower decks. They improve grass lift and discharge, making them ideal for cutting tall or wet grass and producing a cleaner, more manicured lawn finish.

Fitment & Compatibility

Before buying, confirm your mower has a 60-inch deck and that the blade spindle pattern matches Toro’s 3-hole, 5-inch center-to-center pattern. These blades fit Toro TimeCutter, Titan, Z Master, Max Z, MX 6000, 6020, 6050, and 6080 models. They replace OEM part numbers 105-7718-03, 038-6050-00, 133-2127, and 103-2530. Measure your existing blade length: these are 20.5 inches long, 2.25 inches wide, with a 1-inch center hole and 0.25-inch thickness. If your current blade matches those dimensions and the spindle pattern, these will fit. Aftermarket blades may require rebalancing—check for wobble after installation.

Key Things to Know

• Lift quality: High-lift design provides superior grass discharge and bagging, but creates more drag, which may reduce run time per charge on electric models.
• Installation: Easy swap with basic tools (3/4-inch socket and torque wrench). Torque spindle bolts to 70-80 ft-lbs. Use thread locker if bolts are loose.
• Durability: Constructed from heat-treated steel. Expect 25-50 hours of use before sharpening, depending on debris and grass type.
• Common gotcha: These blades are louder than standard or low-lift options due to increased air movement. Not ideal if noise is a concern.

Should You Buy It

Buy these if you have a Toro 60-inch zero-turn and want noticeably better cutting performance, especially in thick or damp grass, and you don’t mind slightly more noise and a small power draw. They’re a reliable, high-rated upgrade over standard blades for a cleaner finish.