115-9649-03 Blades Fit for 60 inch Toro Time Cutter 6000 MX6050 Titan Z Master ZX6000 MX6000 MX6080 Zero Turn Mower, High Lift Notched (3 Pack)

What It Is

The 115-9649-03 is a set of three high-lift notched blades designed for 60-inch cutting decks on select Toro zero-turn mowers. They improve grass lift and discharge in tall or wet grass, making them ideal for residential and commercial mowing where a clean cut matters.

Fitment & Compatibility

• Deck size: Only fits 60-inch Toro decks. Measure your deck width to confirm.
• Model fit: Compatible with Toro TimeCutter 6000, MX6050, Titan Z Master ZX6000, MX6000, MX6080, and similar zero-turn models with a 60-inch deck.
• OEM vs aftermarket: These are OEM Toro blades (part number 115-9649-03). Aftermarket equivalents exist but may differ in thickness, balance, or steel quality.
• Measurements: Center hole diameter is 5/8-inch, blade length is 20.5 inches, width is 2.5 inches. Check your current blade dimensions to match.
• Notched design: The notches align with spindle pins on specific Toro decks. Verify your spindles have pins before buying.

Key Things to Know

• High lift = more power draw: Expect slightly higher engine load and reduced runtime compared to standard blades. Not ideal for light-duty mowers.
• Installation: Changing all three blades takes about 30 minutes with a socket wrench and torque wrench (recommended torque: 70-90 ft-lbs). Use a blade lock or wood block to prevent spinning.
• Sharpening: These blades are heat-treated and can be sharpened, but high-lift edges wear faster. Replace when nicked or bent.
• Common gotcha: Notched blades are deck-specific. Using them on a deck without spindle pins will cause loose fit and vibration.

Should You Buy It

If you own a 60-inch Toro zero-turn and mow thick, damp, or tall grass regularly, this OEM set delivers reliable lift and cut quality. Skip them if your deck lacks spindle pins or you prefer standard lift blades for dry, short grass—the extra cost and power draw won’t benefit you.