115-8437 Brake Cable fits for Toro 22" Personal Pace Recycler Lawnmower

What It Is

The 115-8437 brake cable is a replacement control cable that stops the blade and engine when the operator releases the handle on Toro 22" Personal Pace Recycler mowers. It connects the handle bail to the engine brake system.

Fitment & Compatibility

Check these before buying:

• Deck size: Only fits 22" Toro Recycler mowers with the Personal Pace self-propel system. Not for 21" or larger deck models.
• Model numbers: Works with Toro models 20017, 20018, 20019, 20020, 20021, 20022, 20023, 20024, 20025, 20026, 20333, 20334, 20336, 20337, 20338, 20339, 20340, 20341, 20342, 20343. Check your model tag under the seat or on the frame.
• OEM vs aftermarket: This is an OEM Toro part, so it matches original specs exactly. Aftermarket cables may differ in length or end fittings—avoid unless verified.
• Measurement: Cable is approximately 36" long from end to end. Measure your old cable to confirm.

Key Things to Know

• Installation difficulty: Moderate. You’ll need to remove the handle cover, disconnect the old cable from the bail and brake arm, route the new cable, and adjust tension. Expect 15–30 minutes.
• Common gotcha: The cable can bind if not routed correctly through all clips and guides. Take a photo of the original routing before removal.
• Quality: OEM cable is zinc-coated for corrosion resistance. Aftermarket cables often rust faster or have thinner housings—stick with OEM for reliability.
• Adjustment tip: After installing, adjust the cable so the blade stops within 3 seconds of releasing the bail. Too loose = safety hazard; too tight = hard to engage.

Should You Buy It

Yes, if your Toro 22" Personal Pace Recycler’s blade doesn’t stop when you let go of the handle, or the cable is frayed, kinked, or snapped. At $9.99, it’s a cheap fix that restores safety and compliance. Skip it if you have a different deck size or model series—fitment is narrow.