115-8435 Traction Control Cable - Heavy Duty Self-Propelled Drive Cable for Toro 22" Recycler 20332 20333 20334 20373 20958, Z-Bend & Spring End - Replaces OEM 115-8435

What It Is

The 115-8435 is a heavy-duty traction control cable for Toro 22" Recycler self-propelled mowers. It connects the handle control lever to the drive system, allowing you to engage and disengage the self-propel function.

Fitment & Compatibility

Before buying, verify your mower’s model number (found on a plate under the rear flap or on the frame). This cable fits Toro 22" Recycler models 20332, 20333, 20334, 20373, and 20958. It replaces OEM part 115-8435 with a Z-bend on one end and a spring on the other. Measure your old cable from end to end; the new one should match approximately 36-38 inches in total length (including fittings). If your mower uses a different attachment style (e.g., barrel end), this will not fit.

Key Things to Know

• Quality – Heavy-duty construction with a thicker outer jacket than standard OEM cables, designed to resist kinking and corrosion.
• Installation Difficulty – Moderate. You’ll need to remove the handle cover, disconnect the old cable at both ends, and route the new one through the same path. A pair of pliers and a screwdriver are usually sufficient.
• Common Gotcha – The Z-bend end must be fully seated in the control lever slot; otherwise, the cable can slip during operation. Double-check the spring end is hooked securely to the drive bracket.
• Lubrication – Apply a light machine oil to the inner wire at both ends before installation to reduce friction and prolong cable life.

Should You Buy It

If your Toro 22” Recycler’s self-propel is stiff, broken, or unresponsive, this cable is a direct, budget-friendly replacement. It’s ideal for DIYers comfortable removing a handle cover and routing a cable. For non-Toro mowers or different model numbers, look elsewhere.