110-6568-03 Mower Blade Fit for Toro TimeCutter 42" Deck, 106-2247-03 Meduim Lift Blades Fit for Toro 42 Inch Zero Turn Mower Z420 Z4200, Replace 106-6583-03, 106-8744-03, 2 Pack

What It Is

This is a 2-pack of 110-6568-03 medium-lift mower blades designed for Toro TimeCutter 42" decks and select Toro Z420/Z4200 zero-turn mowers. They replace OEM part numbers 106-6583-03 and 106-8744-03, delivering a balance of cutting performance and bagging efficiency for residential mowing.

Fitment & Compatibility

Before buying, confirm your mower deck is exactly 42 inches (measured from blade tip to blade tip). These blades fit Toro TimeCutter models (e.g., SS4225, SS4235) and Toro Z420/Z4200 series zero-turn mowers. Verify your current blade part number matches 106-6583-03 or 106-8744-03. Measure the blade length (should be ~21 inches), center hole diameter (should be ~1 inch), and spindle pattern. These are OEM-equivalent, not genuine Toro, so check that the offset and lift angle match your deck design—especially if you have a mulching kit or bagger.

Key Things to Know

• Quality: Medium-lift design works well for side-discharge and bagging, but may not mulch as finely as a dedicated mulching blade. Steel thickness is adequate for residential use.
• Installation: Straightforward bolt-on replacement. Use a torque wrench to tighten spindle bolts to 70–90 ft-lbs (check your manual). Mark blade orientation before removing old ones.
• Common gotcha: These blades are slightly heavier than some OEM options—ensure your spindle bearings are in good shape to avoid vibration. Also, they may not fit decks with a different spindle bolt pattern (e.g., some 42" Toro decks use a 5-point star center).
• Sharpness: They come pre-sharpened but may need a quick touch-up after first use if you hit rocks or roots.

Should You Buy It

If you need a budget-friendly replacement for your Toro 42" TimeCutter or Z420/Z4200 and don’t require premium mulching performance, this 2-pack is a solid value. It’s best for residential users who mow weekly and prioritize bagging or side-discharge. Avoid if you have a non-Toro deck, a different blade length, or need heavy-duty commercial blades.