0622010330 Servis/Rhino Blade Pair

What It Is

This is a pair of OEM-replacement mower blades (part #0622010330) designed for Servis/Rhino finish mowers and rotary cutters. It’s intended for heavy-duty grass cutting on commercial or large residential properties.

Fitment & Compatibility

Before buying, verify three things:

• Deck size: These blades fit 60-inch and 72-inch Servis/Rhino decks (check your model’s manual for exact size).
• Model fit: Compatible with Servis/Rhino S, R, and SR series finish mowers, plus some older Rhino rotary cutters. Not universal—confirm your machine’s part number matches.
• OEM vs aftermarket: This is a genuine Servis/Rhino part, so it’s a direct swap for the original blades. If you have aftermarket blades, measure center hole diameter (usually 1-inch) and blade length (typically 20.5 inches) to ensure fit.
• Measurements: Blade length ~20.5 inches, width ~2.5 inches, thickness 0.25 inches. Center hole is 1-inch round with a 0.5-inch offset for the bolt pattern.

Key Things to Know

• Quality: Heat-treated steel with a hardened edge; lasts longer than budget blades on rocky or sandy soil.
• Installation: Moderate difficulty—use a torque wrench (60-80 ft-lbs) and thread locker. The offset hole requires correct orientation (sharp edge forward).
• Common gotchas: Don’t mix with non-OEM blades—balance issues can cause vibration. Check blade bolts for wear; replace if rounded.
• Pair only: This is a two-blade set, not a full set for four-blade decks. If your deck uses four blades, you’ll need two pairs.

Should You Buy It

If you own a Servis/Rhino finish mower and need reliable, factory-matched blades that won’t cause vibration or premature wear, this pair is a solid investment. It’s best for commercial users or homeowners with large, rough properties who prioritize durability over price. Skip it if you have a different brand deck or only need a single blade.