038-4826-00 Blades (Notched High Lift) for Bad Boy MZ Magnum ZT CZT Elite Stand-On 48 Inch Deck (3-Pack)

What It Is

This is a 3-pack of notched high-lift mower blades (part number 038-4826-00) designed for Bad Boy MZ Magnum, ZT, CZT Elite, and stand-on mowers with a 48-inch cutting deck. The high-lift profile creates stronger airflow for superior grass discharge and bagging performance, making them ideal for tall or damp grass.

Fitment & Compatibility

Before buying, verify these three things:

• Deck size: This 3-pack fits only 48-inch Bad Boy decks. Measure your deck width to confirm.
• Model compatibility: Works with MZ Magnum, ZT, CZT Elite, and stand-on models. Check your mower’s model number against Bad Boy’s OEM parts list.
• Blade measurements: Each blade is 16.5 inches long, 0.25 inches thick, with a 5/8-inch center hole and a 7/8-inch offset. Measure your old blade’s length, hole diameter, and offset (distance from center hole to blade tip) to confirm match.

These are aftermarket blades, not OEM Bad Boy. They should fit if dimensions match, but verify the offset – a mismatch can cause poor cutting or deck damage.

Key Things to Know

• Quality: Made from hardened steel with a painted finish. Users report they stay sharp longer than OEM blades in normal residential use, but may dull faster in sandy or rocky conditions.
• Installation: Moderate difficulty. You’ll need a socket wrench and torque wrench (recommended torque: 70-90 ft-lbs). Always lift the deck and use a blade stop or wooden block to prevent rotation.
• Common gotchas: High-lift blades increase deck vibration and noise – normal. They also require more engine power; if your engine bogs down, mow at a slower ground speed. Avoid over-tightening bolts – stripped threads are permanent.
• Balance: These blades come pre-balanced, but always check with a balancer after installation. An unbalanced blade causes uneven cuts and deck wear.

Should You Buy It

If you own a 48-inch Bad Boy ZT or stand-on mower and need reliable, affordable replacement blades for bagging or discharging in thick grass, this 3-pack is a solid value. It’s not for sandy soils or low-lift mulching applications – skip it if you primarily mulch or cut in fine turf.